www.industry-asia-pacific.com
Stober News

The engineer who is on top of it

STOBER has further advanced its One Cable Solution (OCS) in collaboration with encoder manufacturer HEIDENHAIN, bringing the next generation to the market.

The engineer who is on top of it
Next level: STOBER has further advanced its One Cable Solution in collaboration with encoder manufacturer HEIDENHAIN.

Thanks to the future-proof HEIDENHAIN EnDat® 3 protocol, the new hybrid cable can reliably connect motors and drive controllers at a distance of up to 100 meters. The user receives a complete system consisting of synchronous servo motor, cable and the appropriate drive controller. One of the leading figures behind this development is Dr. Florian Dreher, Head of Development and Purchasing for Motors at the Pforzheim-based drive specialist.

Pforzheim-based drive specialist STOBER has been offering the One Cable Solution—or OCS for short—since 2016. While a conventional solution has one cable that transmits the encoder data and another that carries the electrical power, there is one hybrid cable with OCS that handles both tasks. Until now, there have been minor weak points: If encoders and drive controllers are spaced more than 15 meters apart, data can no longer be transmitted without faults in all cases. In that case, an output choke is needed for each cable. A choke is expensive and takes up extra space in the control cabinet. "We have solved these problems in cooperation with HEIDENHAIN," Dr. Dreher explains. "To do this, we further developed the existing STOBER one-cable solution and optimized it specifically for highly dynamic applications in drag chains." As Head of Development and Purchasing for Motors, he was instrumental in this.


The engineer who is on top of it
The new hybrid cable from STOBER unites energy supply and data transmission in one space-saving, economical cable sheath—for maximum efficiency between geared motors and drive controllers.

Dr. Dreher has been working at STOBER since 2017. The 38-year-old studied mechanical engineering in Karlsruhe. Even then, he had a strong liking for electrical engineering. "I really like both fields, and at that time, unfortunately, the major in Mechatronics did not yet exist," he says regretfully. After graduating, he began working at a large drive technology manufacturer and earned his doctorate by studying part-time in addition to working. His research project concerned the design of electrical machines. Why did he make the switch to STOBER? "My former employer is also family-run, but simply too big. I was one of many," he explains. At the Pforzheim-based drive specialist, he values the product range, which he finds very interesting. "We develop all components in-house. These include motors and gear units on the one hand, and cables on the other," he says. "The company is streamlined, the hierarchies are flat and there is excellent communication with other departments such as Gear Unit Design and Electronics. In addition, we are globally active. For some years now, we have been increasing our focus on the Asian and North American markets." In addition, STOBER is also a family-owned company. This has a positive impact on our collaboration.


The engineer who is on top of it
STOBER OCS in combination with the newly developed HEIDENHAIN EnDat® 3 interface in the cable carrier: up to 50 meters without chokes.

One of the trendsetters
For STOBER, it goes without saying that we have our eye on the competition and always compete on an equal footing. "Nevertheless, we are also often one of the trendsetters, as with the development of our OCS." In cooperation with the manufacturer of the new hybrid cables, STOBER subjected them to numerous lab tests. Even after five million cycles, the quality of the data transmission is good enough that all signals could be read and evaluated flawlessly without errors in the encoder communication, even at a cable length of 50 meters without a choke. "We did have some obstacles to overcome in the beginning," Dreher says. But the lessons learned from this were enormous. Comparable cables from other providers fail here in the standard version. The second OCS generation from STOBER, on the other hand, does not.


The engineer who is on top of it
Error-free signal transmission and proven in the load test. The STOBER hybrid cable is suitable for many applications, such as robotics.

An eye on the system
As project manager, Dr. Dreher was responsible for the cable design and production, interference resistance and test coordination. "Most competitors would conduct separate tests on the individual components that play a critical role in the flawless function of the OCS," says Dreher. "By contrast, our test focused on how they work together." For the department head, this was also the most important insight. "We must always have an eye on the system." This includes cable, motor, encoder and drive controller. This meant that each relevant specialist department had to be involved in the project. Therefore, it was very important to have good communication with each other, particularly with development partner HEIDENHAIN and STOBER's Electronics Development department. This also included the manufacturer of the hybrid cables, which also provided the drag chain system for the tests. The experience that Dreher took away from the OCS project is that teamwork is enormously important and paves the way to maximum success.


The engineer who is on top of it
Dr. Florian Dreher: "In all that we do, our components in the system must always work together as best possible."

What will happen now with OCS? Dr. Dreher pauses briefly to consider, then says, "We want to clarify the added value for our existing and potential customers. Many users on the market still see us as one among many in this area. But we aren't." The fact is that the OCS system, composed of geared motors, cables and electronics, ran in a field test around the clock for over half a year without faults. In addition, the components included in the system can each be connected with just a click.

Are there plans for the future? "We will continue making technical improvements to motors and cables," Dreher promises. "This involves taking the most finely tuned STOBER system and advancing it even further. Because this is exactly what our success factor is." Dr. Dreher also shares responsibility for determining the direction of future developments and coordinating the individual departments to that end. As the unifying head, he's on top of it.

www.stoeber.com

  Ask For More Information…

LinkedIn
Pinterest

Join the 155,000+ IMP followers